Sales & Support +44(0)161 9285679

Protect your sleeves and your operators whilst achieving clean cuts/joints on your flexo plates and tape with our range of cutting systems
Apply tape faster, more precisely and more consistently with our range of operator friendly tape holders and applicators
Press manufacturers are working tirelessly to reduce start up waste through accurate pre-setting. We have a range of solutions to match your mounter to your press pre-setting system
For manual mounters without motorised cameras, LED display showing positional data in the X axis significantly aides operator set-up negating the need of a tape ruler
A table, powered pneumatically to advance and retract as required. Options to hold the rear and/or front half of the plate during mounting (this avoids the need to protect the rear half of the plate mounting tape on the sleeve with silicone release liner)
Improve efficiency, consistency and remove the risks of air bubbles often associated with ‘hand rolling’ using our silicone foam lay down roller. This applies an even pressure across the full width of the sleeve for both tape and plate application

Mounter Proofer

A range of mounter proofers to mount and create a physical proof of the plates and the register before long production runs. Proofing uses acrylic/paste ink on paper.


  • Available in manual or servo-motorised models
  • Available for sleeve or cylinder versions
  • Facilitates high mounting and proofing accuracy
  • Heaford has over 25 years’ experience in mounter proofers
  • Web widths up to 1800mm(71”)
  • Repeat from 300mm(12”) to 1500mm(59”)

Associated Products:

  • Sleeve exchange unit

Model 2CS & WW


A range of mounter proofers to both mount and create a physical proof of the plates and the register before long
production runs.

Proofing using acrylic/paste ink on paper.

Available in manual or servo motorised models.


  • Web widths available up to
  • 1950mm (76.7”)
  • Repeat range up to 1500mm (59”)
  • Bi-directional mandrel drive
  • 27” touch screen colour monitor
  • Servo driven or manually
  • Positioned cameras


  • Bar code scanner
  • CheckMount
  • Pre-register system
  • Rear plate support table
  • Plate and tape cutter
  • Cylinder version
  • Plate and tape laydown roller

Register Your Interest

Get in touch now to register your interest in the Mounter Proofer. Our friendly, professional team is waiting to help you with all your enquiries.

Send your completed form and we will respond as quickly as we can.