Corrugated – Post Print Mounter Proofer
PPMPT Range
Provides post print mounting with proofing, for accurate plate verification and register.
- Mount & proof on the same machine
- Robust cast table ground to high flatness tolerance
- Precision ground aluminium proof drum
- Manual job input or connectivity option for job transfer
- Servo drive to cameras (X-axis) with unique “loop” measurement to ensure totally repeatable positions
- Servo drive low friction ball screws for precise camera positioning
- HMI control
Cutting
Protect your sleeves and your operators whilst achieving clean cuts/joints on your flexo plates and tape with our range of cutting systems.
Camera Measurement
For manual mounters without motorised cameras, LED display showing positional data in the X axis significantly aides operator set-up negating the need of a tape ruler.
Laydown Roller
Improve efficiency, consistency and remove the risks of air bubbles often associated with ‘hand rolling’ using our silicone foam lay down roller. This applies an even pressure across the full width of the sleeve for both tape and plate application.
Barcode
Faster job set-up and elimination of operator errors in job set up with our barcode scanner and associated software to generate job cards & read barcodes for automatic entry of mounting co-ordinates via your company network.
Check Mount
Help operators mount consistently with a simple visual traffic light system with user defined mounting tolerance. Featuring a target recognition system that works on all types of register marks.
Quality Report
Automatically generate QA reports with images of mounted plates by colour along with positional data and variance (actual position v programmed position), Stored electronically in PDF format.
SHIM Tensioner
The system has been designed to apply a consistent and controllable tension across the full width of the shim which ensures it remains flat, removes any edge curl and can enhance the mounting process.
Vacuum Table
A vaccum system to assit with fixing the carrier shim to the table during mounting.
PPMPT Mounter Proofer
Description
Post print mounting made easy on our
highly configurable range of flat table
post print mounters featuring both
manual and servo positional cameras
along with connectivity to your prepress systems
– Intuitive user interface
– High magnification fixed focus HD colour camera
system
– Connectivity options for Esko, Hybrid and other pre-press systems
– Solid aluminum table with steel fabricated/welded support frame
Specifications
Web widths available
– 2600mm(102″)
– 3000mm(118″)
– 3600mm(142″)
− Maximum carrier sheet length 1680mm(66″)
− Two 50x magnification HD colour digital inspection cameras
− 27” colour monitor
− Servo driven ball screw
− Servo driven cameras with high positional accuracy tolerance +/- 0.002 mm (2CS model)
Associated Products
– Barcode scanner
− Laydown roller
− Vacuum table
− Rear shim tensioner
− CheckMount
Register Your Interest
Get in touch now to register your interest in the corrugated mounter proofer. Our friendly, professional team is waiting to help you with all your enquiries.